Wi-Fi icon with a cross representing a Mac that will not connect to Wi-Fi

A Mac that suddenly refuses to connect to Wi-Fi, or keeps dropping the connection, is frustrating precisely because everything else about the laptop usually still works fine — you're just cut off from the internet. It can show up as no networks listed at all, a network that connects but has "No Internet" next to it, or endless spinning while it tries to join.

This guide works through the likely causes in order, starting with the simplest checks and moving into Mac-specific network settings if needed. We'll also cover how to tell whether the problem is actually with your Mac, or with your router or broadband instead.

This is a common issue on Macs of all ages, and it's very rarely a sign of a serious fault. Software network settings can get into a confused state, especially after a macOS update, and usually just need resetting.

Work through the steps in order — most people are back online within the first few.

Call us first rather than troubleshooting alone if:
  • Other devices — phones, tablets, other laptops — also can't connect to the same Wi-Fi network, which points to your router or broadband rather than the Mac
  • The Mac has fallen in water, been dropped, or shows other physical damage around the same time the Wi-Fi stopped working
  • You're being asked to enter Wi-Fi passwords repeatedly for a network you know is correct, or seeing repeated authentication failures
  • The problem started right after a macOS update and basic troubleshooting hasn't helped after a day or two

Step-by-step guide

  1. 1

    Check if other devices can connect

    Try connecting a phone or another laptop to the same Wi-Fi network. If they also can't connect, the problem is likely your router or broadband rather than your Mac, and restarting the router is the better first step.

  2. 2

    Turn Wi-Fi off and on again

    Click the Wi-Fi icon in the top menu bar, turn Wi-Fi off, wait about ten seconds, then turn it back on. This is quick and resolves a surprising number of temporary connection glitches.

  3. 3

    Restart your Mac

    Click the Apple menu in the top-left corner and choose Restart. A full restart clears out network settings that may have become stuck in a bad state, which is one of the most effective simple fixes.

  4. 4

    Forget and rejoin the network

    Go to System Settings, then Wi-Fi, click the (i) info icon next to your network name, and choose "Forget This Network." Then reconnect from scratch by selecting the network and entering the password again — this clears out any corrupted saved network details.

  5. 5

    Restart your router

    Unplug your router from the power socket, wait about 30 seconds, then plug it back in and wait a few minutes for it to fully restart. This resolves many connection issues that aren't actually related to the Mac at all.

  6. 6

    Check the date and time settings

    Go to System Settings, General, Date & Time, and make sure "Set date and time automatically" is turned on. An incorrect date can cause secure Wi-Fi connections to fail in ways that look like a general connection problem.

  7. 7

    Run Wireless Diagnostics

    Hold the Option key and click the Wi-Fi icon in the menu bar, then choose "Open Wireless Diagnostics," and follow the on-screen prompts. This built-in Apple tool checks your connection and can highlight specific issues like interference or a weak signal.

  8. 8

    Reset the network settings location

    Go to System Settings, Wi-Fi, click the (i) icon, and check the network settings for that specific Wi-Fi network, such as whether it's set to use a manual IP address instead of automatic — switching this back to "Automatically" under TCP/IP settings fixes many stubborn cases.

  9. 9

    Update macOS

    Go to System Settings, General, Software Update, and install anything available. Apple regularly fixes Wi-Fi-related bugs in macOS updates, and running an older version can leave known issues unresolved.

Why this happens

Corrupted saved network settings

Macs store details for every Wi-Fi network you've ever joined, and occasionally these saved details become corrupted, causing connection failures specifically for one network while others work fine.

Router or broadband issues

Sometimes the fault isn't with the Mac at all — routers can develop temporary glitches, broadband can drop out, or too many devices can strain an older router's capacity.

macOS update changes

Software updates occasionally change or reset network settings, or introduce new bugs affecting Wi-Fi, which is usually resolved in a follow-up update or by resetting the connection manually.

Incorrect date and time

Secure Wi-Fi connections rely on your Mac's clock being accurate to validate network security certificates, so an incorrect date can cause connections to fail in ways that look unrelated to the actual cause.

Wi-Fi interference or distance from the router

Physical obstacles, distance, and interference from other electronics or neighbouring networks can weaken a Wi-Fi signal enough to cause dropped or failed connections.

A manually configured IP address

If your Mac's network settings were previously changed to use a fixed IP address rather than obtaining one automatically, this can cause connection failures if the network configuration has since changed.

How to avoid it next time

  • Keep macOS updated so known Wi-Fi bugs are fixed automatically.
  • Restart your router occasionally, even when things seem fine, to clear out accumulated glitches.
  • Avoid manually changing network settings like IP addresses unless you have a specific reason to.
  • Keep your Mac's date and time set to update automatically.
  • Forget and rejoin problematic networks occasionally rather than letting corrupted saved settings linger.
  • Position your router centrally and away from thick walls or large electronics where possible, for a stronger signal.

Still stuck?

If your Mac still won't connect to Wi-Fi after trying the steps above, just call us. We can connect remotely with your permission (once you have any working internet connection, even a phone hotspot temporarily) or talk you through it over the phone step by step, as part of our general computer support.

Call: 0800 066 8910 Free

This guide is part of our General Computer Help service — see what's included if you'd rather have us sort it directly.

Frequently asked questions

Why does my Mac show "No Internet" even though it's connected to Wi-Fi?

This usually means the Mac has joined the network successfully but isn't getting a working internet connection through it, which often points to a router or broadband issue rather than the Mac itself. Try restarting your router first.

Why can't my Mac see any Wi-Fi networks at all?

This can happen if Wi-Fi has been accidentally turned off, if there's a software glitch affecting the network scan, or occasionally due to a hardware issue. Turning Wi-Fi off and on again, then restarting the Mac, are good first checks.

Will forgetting a Wi-Fi network delete anything important?

No, it only removes the saved connection details and password for that specific network, which you simply re-enter when reconnecting. It doesn't affect any files, apps, or other settings.

Why does my Mac keep disconnecting from Wi-Fi randomly?

This is often related to signal strength, interference, or router issues rather than the Mac itself, though a corrupted network profile can also cause it. Restarting both the router and the Mac is a good starting point.

Could my Mac's Wi-Fi hardware actually be broken?

It's possible but relatively uncommon, especially if the Mac can still see networks listed even if it can't connect. If none of the software fixes help, hardware is worth investigating properly, and we can help work out which it is.

Does an incorrect Wi-Fi password cause the same symptoms as a broken connection?

Yes, entering an outdated or incorrect password produces very similar symptoms to a genuine connection fault, so it's worth double-checking the password, particularly if it's recently changed on your router.

Why does my Mac connect fine at home but not elsewhere?

This usually points to something specific about the other network, such as a guest network requiring extra sign-in steps, rather than a fault with your Mac, since it's working correctly on your home network.

Should I use Wireless Diagnostics before calling for help?

It's a useful step since it's built into every Mac and can highlight the specific cause, but it's completely fine to skip it and call us if you'd rather not work through it yourself.

Can old macOS software cause Wi-Fi connection problems?

Yes, running an outdated version of macOS can leave known Wi-Fi bugs unpatched, so checking for and installing software updates is a worthwhile step if the problem persists.

Why does resetting the router fix Mac Wi-Fi problems so often?

Routers, like any device, can develop temporary software glitches over time, and a restart clears these out, which resolves a large proportion of everyday connection issues regardless of what device is trying to connect.

Is it normal for a Mac to need Wi-Fi troubleshooting occasionally?

Yes, it's a common enough issue across all Mac models and ages, usually down to software settings rather than anything wrong with the laptop itself, and it's rarely a sign of a bigger problem.

Can you help if I only have my phone's internet to get online right now?

Yes — you can call us on the phone and we'll talk you through the fix step by step even without a remote connection, or connect remotely once you've got any working internet, even briefly through a phone hotspot.

Why does my Mac ask for a Wi-Fi password even though I never set one?

Some networks, particularly in offices or shared buildings, use a password without you realising, and public or guest networks sometimes need a separate sign-in step through a web page rather than a traditional password prompt.

Call Now: 0800 066 8910 Free