External hard drive icon with a question mark representing a drive not showing up on a computer

Plugging in an external hard drive and having nothing happen — no drive letter, no notification, nothing in File Explorer — is one of the more stressful computer problems there is, especially if the drive holds photos, documents or backups you cannot afford to lose. Take a breath: in most cases the drive itself is fine, and the fix is something straightforward on the computer's side rather than anything wrong with your files.

This guide takes you through the checks in a sensible order, starting with the things that solve the problem in seconds and only moving on to more involved fixes if you need them. None of the early steps risk your data, so there is no harm working through them calmly, one at a time, testing after each one.

External drives fail to show up for all sorts of reasons that have nothing to do with the files on them being damaged — a loose cable, a driver hiccup, or a drive letter conflict are all far more common than actual drive failure. Most people who call us about this get their files back without any lasting data loss.

If you reach a point where you are worried about data loss, stop and read the when to worry section below before doing anything else, since some steps that are safe for a healthy drive are not a good idea if the drive is actually failing. Getting this distinction right early on matters far more than rushing through every step.

Call us first rather than troubleshooting alone if:
  • The drive makes clicking, grinding, or repetitive beeping noises when connected
  • The drive gets unusually hot or has previously been dropped or knocked
  • Windows repeatedly asks you to format the drive before you can use it
  • You need the data recovered urgently and cannot afford to risk further attempts yourself

Step-by-step guide

  1. 1

    Try a different cable and USB port

    Cables fail more often than the drives themselves, especially if they get bent or trodden on. Swap to a different USB cable if you have one, and try a different USB port on your computer, ideally one directly on the computer rather than through a hub or dock. This single step resolves a surprising proportion of the cases we hear about.

  2. 2

    Check the drive is getting enough power

    Many external hard drives, particularly larger desktop-style ones, need more power than a single USB port can reliably provide. If your drive came with its own power adapter, make sure it is plugged in and switched on, and try a powered USB hub if you are using a laptop. Listen for a faint spinning sound, which usually means the drive is at least receiving power.

  3. 3

    Look in Disk Management, not just File Explorer

    Right-click the Start button and choose Disk Management. If the drive appears here with a grey or unallocated bar but no drive letter, Windows can see it but is not displaying it properly, which is a much easier problem to fix than it sounds. This is one of the most useful checks in the whole process.

  4. 4

    Assign a drive letter if one is missing

    Still in Disk Management, right-click the drive's partition and choose Change Drive Letter and Paths, then Add, and pick any unused letter. This alone solves a surprising number of missing drive cases, and takes barely a minute once you have found the right screen.

  5. 5

    Try the drive on another computer

    If you have access to a second computer, plug the drive in there. If it shows up fine, the problem lies with your original computer's settings rather than the drive, which narrows things down considerably and saves you troubleshooting the wrong thing.

  6. 6

    Update or reinstall the USB and disk drivers

    In Device Manager, expand Disk drives and Universal Serial Bus controllers, right-click each entry connected to your drive, and choose Update driver. A driver conflict is a common and easily fixed cause of drives not appearing, particularly after a recent Windows update.

  7. 7

    Check Device Manager for a yellow warning icon

    A yellow triangle next to any USB or disk entry means Windows has spotted a problem with that specific piece of hardware or driver. Right-click it and select Uninstall device, then unplug and reconnect the drive so Windows reinstalls it fresh, which often clears the warning entirely.

  8. 8

    Rule out a failing USB hub or dock

    If you normally connect the drive through a hub, dock, or extension lead, try plugging it directly into the computer instead. Hubs and docks are a common weak link, particularly cheaper or older ones that were not designed with larger drives in mind.

  9. 9

    Stop and seek help if the drive is making noise

    If the drive is clicking, grinding, or unusually silent when it should be spinning, further plugging and unplugging can make data recovery harder. This is the point to stop the DIY steps and get proper advice instead, rather than risking further damage.

Why this happens

A loose or faulty cable

Even a cable that looks fine can have a broken wire inside, causing an intermittent connection that Windows cannot maintain long enough to display the drive. This is often worse when the cable is bent at a particular angle.

Insufficient power

Some drives simply cannot draw enough power through a standard USB port, particularly on laptops, and will fail to spin up fully. This is especially common with larger desktop-style external drives rather than smaller portable ones.

A missing drive letter

Windows sometimes detects the hardware perfectly well but fails to assign it a letter, which makes it invisible in File Explorer despite being present. This is one of the easiest causes to fix once identified.

Driver conflicts

USB and disk drivers occasionally become corrupted or fall out of date after a Windows update, causing previously working drives to stop being recognised. Reinstalling the relevant driver almost always resolves this.

File system corruption

If the drive was unplugged unsafely or lost power mid-write, the file system can become unreadable to Windows, even though the underlying data is often still intact. This is a more delicate situation that deserves careful handling.

Genuine hardware failure

Less commonly, the drive's internal electronics or mechanical parts have failed, which is when noises like clicking or grinding tend to appear. This is the one cause on this list that DIY steps cannot fix.

How to avoid it next time

  • Always use Safely Remove Hardware before unplugging an external drive.
  • Avoid moving or knocking the drive while it is actively reading or writing.
  • Use the cable and power adapter that came with the drive where possible.
  • Keep a second backup copy of anything irreplaceable, rather than relying on one drive alone.
  • Plug drives directly into the computer rather than through unpowered hubs when you can.
  • Give portable drives time to spin up fully before opening them in File Explorer.

Still stuck?

If none of that brings the drive back, or you are hearing any unusual noises, it is best to stop before trying anything else yourself. Call us and talk it through as part of our general computer support — we can often work out over the phone whether this is a simple fix or something that needs more careful handling to protect your files, and advise you honestly either way.

Call: 0800 066 8910 Free

This guide is part of our General Computer Help service — see what's included if you'd rather have us sort it directly.

Frequently asked questions

Will I lose my files if my external hard drive isn't showing up?

Not necessarily — in most cases the files are still intact and the problem is with how the drive is connecting or being recognised, not with the data itself. Noises like clicking are the main sign of a more serious problem worth taking seriously.

Should I click Format when Windows asks me to?

No, not if the drive has files on it you want to keep. Formatting erases the drive's file system, and while data recovery is sometimes still possible afterwards, it is much better to work out why Windows is asking first, before taking any irreversible step.

Why does my drive show up on one computer but not another?

This points to something on the second computer, such as a driver issue, a power problem with that particular USB port, or a missing drive letter, rather than a fault with the drive itself, which is reassuring news.

Is it normal for an external hard drive to take a while to appear?

A short delay of a few seconds is normal, especially for larger desktop-style drives spinning up, but if nothing appears after thirty seconds or so it is worth working through the troubleshooting steps rather than waiting longer.

Can a USB hub stop my external drive from working properly?

Yes, particularly cheaper or unpowered hubs, which may not supply enough power for the drive to run reliably. Plugging directly into the computer is the most reliable option if you are able to.

What does it mean if the drive shows in Disk Management but not File Explorer?

It means Windows can see the hardware but has not given it a drive letter or recognised its file system properly, both of which are usually fixable without any risk to your data, and often within a couple of minutes.

How much does data recovery normally cost?

It varies a lot depending on what has actually gone wrong with the drive, so we always talk through the situation with you first and give you a clear idea of cost before doing anything, with no obligation to proceed.

Can I fix a clicking hard drive myself?

We would not recommend trying, as repeated power cycles on a drive that is clicking can make any eventual data recovery more difficult. It is best to leave it switched off and get advice first, rather than experimenting further.

Why did my drive work yesterday and not today?

Sudden changes like this are usually down to a driver update, a Windows update, or a cable or port that has started to fail, rather than anything you have done, so try not to worry too much about the cause.

Is it worth buying a new external drive instead of fixing this one?

Only if the drive turns out to have failed physically. Most connection and recognition problems are fixed through settings changes rather than needing new hardware, so it is worth troubleshooting first before spending any money.

Can a laptop being on battery power affect an external drive?

On some laptops, power-saving modes reduce power to USB ports when running on battery, which can affect drives that need more power than usual. Plugging the laptop into the mains before connecting the drive can help.

Call Now: 0800 066 8910 Free