Troubleshooting Guides
Ethernet Not Working? Troubleshooting Guide
A wired ethernet connection is usually the most reliable way to get online, so when it suddenly stops working it can be genuinely puzzling — especially when Wi-Fi on the same device might be working perfectly fine. The good news is that ethernet problems tend to come down to a fairly small list of causes, most of which you can check yourself in a few minutes without any special tools or technical knowledge.
This guide walks through those causes in order, starting with the simplest physical checks before moving on to settings on your computer. It applies whether you are plugged straight into a router or into a separate network switch, and whether you are using a desktop PC, a laptop, or a laptop with a USB adapter.
Wired connections are generally simpler and more stable than Wi-Fi, so when they do go wrong it is very often something straightforward like a loose cable, a faulty port, or a setting that got changed rather than anything seriously wrong with your computer or router. It is rarely as serious as it first feels.
Work through the steps below roughly in order — the first few resolve the large majority of ethernet problems, and each one only takes a minute or two to check.
- The ethernet port on your computer or laptop shows no lights at all, even with a cable you know works elsewhere
- Multiple cables and multiple ports all fail to connect, suggesting a fault with the router or switch itself
- The connection works briefly then drops repeatedly
- You smell burning or notice physical damage to the cable, port, or router
Step-by-step guide
-
1
Check the physical connection at both ends
Unplug the ethernet cable from both your computer and the router or wall socket, check the clip on each end has not snapped off, and plug it back in firmly until you hear or feel it click into place. A cable that looks fine can still be loose enough to lose connection.
-
2
Look for the port lights
Most ethernet ports have small lights next to them that should light up or flicker when a cable is properly connected and active. No lights at all on either end usually points to a cabling or port problem rather than a settings issue.
-
3
Try a different ethernet cable
Cables do wear out or get damaged, especially if they run under carpet, near door hinges, or get regularly unplugged. Swapping in a cable you know works, even a short one borrowed temporarily, quickly rules cabling in or out as the cause.
-
4
Try a different port on the router
Router and switch ports can fail individually while the rest of the device works fine. Moving your cable to a different numbered port on the back of the router is a simple way to test this.
-
5
Restart your router and your computer
Turn the router off at the wall for about 30 seconds, then turn it back on and give it a couple of minutes to fully restart, then restart your computer as well. This clears many temporary networking glitches on both ends of the connection.
-
6
Check your network adapter is enabled
On Windows, go to Settings, Network & Internet, and check that Ethernet is not disabled. On a Mac, go to System Settings, Network, and check the Ethernet entry is not showing as "Not Connected" or turned off.
-
7
Check for a USB-to-ethernet adapter issue
If your laptop uses a USB or USB-C ethernet adapter rather than a built-in port, try unplugging and reconnecting it, trying a different USB port, and confirming Windows or macOS recognises it in the device or network list.
-
8
Update or reinstall the network driver
On Windows, open Device Manager, find your ethernet adapter under Network Adapters, right-click it and choose Update Driver. An outdated or corrupted driver can prevent a perfectly good cable and port from working.
-
9
Test the cable and port with another device
If you have another laptop or device with an ethernet port, try the same cable and port with it. If that device connects fine, the issue is specific to your original computer rather than the cable, port, or router.
Why this happens
Damaged or worn cable
Ethernet cables can fray or have their clips snap off with regular use, especially if they are bent sharply or trodden on.
Faulty port
Either the port on your computer or the port on the router can fail individually, sometimes after a power surge or simply from age.
Disabled network adapter
A network adapter can be accidentally disabled in Windows or macOS settings, especially after an update or a system change.
Outdated or corrupted driver
The software that lets your computer talk to the ethernet hardware can become outdated or corrupted, particularly after a Windows update.
Adapter compatibility issues
USB-to-ethernet adapters, common on modern slim laptops, can be less reliable than a built-in port and are more prone to connection drops.
Router or switch hardware fault
Occasionally the fault sits with the router or network switch itself rather than anything on your computer's end.
How to avoid it next time
- Handle ethernet cables gently and avoid sharp bends, especially near the clip end.
- Keep cables away from areas where they will be regularly trodden on or caught in doors.
- Keep your network drivers up to date through Windows Update or your Mac's software updates.
- Label or note which router port each device uses, so a faulty port is easier to spot later.
- Avoid unplugging and replugging cables more than necessary, as repeated strain wears out the connector.
- Keep a spare ethernet cable at home so you can quickly rule cabling in or out if a connection drops.
Still stuck?
If your ethernet connection is still not working after trying these steps, give us a call. Our general-computer-support team can talk you through further checks over the phone, or connect remotely with your permission to look at your network settings directly.
Call: 0800 066 8910 FreeThis guide is part of our General Computer Help service — see what's included if you'd rather have us sort it directly.
Frequently asked questions
Why does my ethernet cable show as connected but I have no internet?
This usually points to a settings or router issue rather than the cable itself — try restarting your router, and check your computer is not set to a fixed IP address that no longer matches your network.
Can a faulty ethernet cable cause slow speeds rather than no connection at all?
Yes, a damaged cable or one not rated for higher speeds can still connect but perform poorly. Swapping it for a known-good cable is worth trying if speeds seem unusually slow over a wired connection.
Why does my laptop only have Wi-Fi but I need ethernet?
Many slim modern laptops leave out a built-in ethernet port to save space. A USB or USB-C to ethernet adapter is an inexpensive way to add a wired connection.
Do all ethernet cables work the same?
Not quite — cables are rated differently (such as Cat5e, Cat6, and Cat6a), which affects the maximum speed they support, though for most home connections any modern cable will comfortably keep up.
Why did my ethernet stop working after a Windows update?
Updates occasionally reset or affect network driver settings. Updating or reinstalling the ethernet driver through Device Manager usually resolves this.
Is it worth using ethernet instead of Wi-Fi?
For anything needing a stable, fast connection, such as video calls or large file transfers, ethernet is generally more reliable than Wi-Fi since it is not affected by walls, distance, or interference.
How do I check if the problem is my computer or the router?
Try the same cable and port with a different device. If that device connects fine, the issue is with your original computer; if it also fails, the router or cable is more likely the cause.
Can a router port really fail on its own?
Yes, individual ports can fail while the rest of the router works normally, particularly after a power surge. Moving to a different port is a quick way to test this.
Why does my ethernet connection keep dropping and reconnecting?
This is often caused by a loose cable connection, an ageing cable, or a driver issue. Checking both cable ends are firmly seated and updating your network driver are good first steps.
Should I try a different network driver version if updating does not help?
Sometimes an older, more stable driver version works better than the very latest one. This is a bit more technical, so it is worth calling us if you get to this point and are not sure how to proceed.
How much does it cost to get help with an ethernet problem?
Give us a call and we will explain the options and pricing before doing any work, so you know exactly what to expect.
Can I test my ethernet port without another cable?
It is difficult to fully rule out a port without a second known-good cable, but checking for port lights and trying the connection in a different application can at least give you a partial picture.
Does the length of an ethernet cable affect reliability?
For typical home distances, length makes very little practical difference, though very long runs, especially over fifty metres or so, can occasionally affect speed and are worth being aware of if your setup involves a long cable run.